Bekisopa Northern Zone Extends Iron ore Strike to 3.3 kms
Released
Released
Announcement PDF
ASX Release
27 January 2022
AKORA Bekisopa Northern Zone shows
64%Fe grades at surface in drill holes BEKD01, 19 and 24
63%Fe product grade using wLIMS process on BEKD01
70.2%Fe product grade using DTT process on BEKD19
68 to 70%Fe is Direct Reduced Iron (DRI) pellet feed grade,
key to a Green Steel future
Highlights:
•
64%Fe, 63.9%Fe, and 63.7%Fe at surface to 6.9m, 4.59m and 3.9m
downhole in drill holes BEKD01, 19 and 24 respectively, suitable for DSO
•
Deeper drilling in the Northern Zone has returned significant widths of
iron mineralisation including:
o
o
o
o
BEKD050
BEKD051
BEKD052
BEKD053
76.3m @ 36.2% Fe
67.4m @ 30.3% Fe
68.1m @ 35.9% Fe
105.3m @ 31.2% Fe incl. 76.5m @ 35.2% Fe
•
Mineral processing test work suggests plus 30% Fe can be readily
upgraded using comminution and magnetic separation to:
o Plus 60% Fe fines at a -2mm crush
o Plus 70% Fe product at a -75µm grind
•
63.0% average iron fines from wLIMS process trials on composites along
drill hole BEKD01 from surface to 43.54m downhole, at a -2mm crush size
•
70.2% average iron concentrate from DTT’s along drill hole BEKD19 from
surface to 35.32m downhole, at a relatively coarse 75 microns sizing
•
69 to 70%Fe product grade achieved in BEKD01 and BEKD19 and
potentially across the Northern Zone, suitable for DRI pellets crucial for
future decarbonisation of the steel industry and Green Steel production
•
3,300 metres of iron mineralisation confirmed along the Northern and
Central Zones indicating potential for a significant JORC Resource
1|Page
Introduction
AKORA Resources (“AKORA” or “the Company”) (ASX Code: AKO) is pleased to provide
shareholders with assay results for Northern Zone drill holes BEKD01, 02,19, 20, 23, 24, 25,
26, 27, 50, 51, 52, and 53 plus processing trial reporting on Bekisopa drill hole BEKD01 and
BEKD19 within Bekisopa tenement 10430. The drilling details for drill hole BEKD01 and
BEKD02 are covered in ASX Announcements of 13 April 2021, BEKD19 and BEKD20 in ASX
Announcement 20 July 2021 and BEKD23 to 27 in ASX Announcement 17 August 2021.
Drill holes intercepted iron mineralisation deep downhole from 135 to 203m and from 144.7m
to 249.3m in BEKD51 and 53 respectively at overall average grade of 30.5% and 31.4%Fe.
The true thickness in these holes being 78m and 105.5m, respectively, of continuous iron
mineralisation. Drill hole BEKD01 was extensively evaluated using magnetic separation
techniques, wet Low Intensity Magnetic Separation (wLIMS) and Davis Tube Tests (DTT) to
better understand the potential to achieve high-grade products along this drill hole and as that
may extend across the Northern Zone.
Across Northern Zone drill holes there are high-grade near surface assays ~64%Fe potential
DSO, substantial iron intercepts downhole grading, 40.5%, 43.8%, 44.3%, 47.0%, 48.6%,
50.2%, 50.3% and 55.2%, refer Appendix 1, Significant Iron Intercepts. Preliminary
processing trial results for BEKD01 from surface to 43.54m showed this interval readily
upgraded at a 2mm crush to 63%Fe and at a 75-micron sizing to an outstanding 69.8%Fe
using magnetic separation, both with substantial reduction in impurities. Drilling details for
hole BEKD50 to 53 are included in Appendix 1 attached, as are the significant iron intercepts
for drill holes BEKD01, 02, 19, 20, 23 to 27 and 50 to 53.
Northern Zone Assay results
Assay results near surface shows a consistent average of 63.98%Fe, 63.9%Fe, 63.8%Fe, and
59.5%Fe from surface to 6.9m, 4.59m, 3.9m and 2.2m, respectively downhole in Northern drill
holes BEKD01, BEKD19, BEKD24 and BEKD23, see Figure 1, and 61.3%Fe from 7.51m to
13.0m downhole in BEKD25. These iron grades are DSO meaning they only require to be
mined, crushed, and screened to produce benchmark grade 62%Fe, or better, as lump and
fines products.
New assay results for drillholes 50 and 51 are reported in the table below:
Hole Number East UTM Z38 North UTM Z38 Elevation Azimuth Dip
BEKD050
585,999.69
7,612,098.60
855.73
90
incl.
and
BEKD051
585,900.11
7,612,099.53
840.95
90
incl.
BEKD052
585,899.41
7,612,299.50
849.3
90
incl.
BEKD053
585,798.42
7,612,299.90
856.53
90
incl.
incl.
Total Depth From
To
Interval % Fe
% SiO2
% Al2O3 % MgO
% CaO
%P
138.2
39.68
40.28
0.6
41.1
13.9
3.6
8.9
8.0
49.31
125.65
76.34
36.2
22.1
3.1
14.0
7.2
52.53
84.42
31.89
41.7
18.1
2.8
13.1
5.0
120.20
125.65
5.45
50.0
12.0
2.7
6.5
5.1
-60
220.65
16.86
21.57
4.71
26.4
44.2
2.3
9.1
0.8
74.95
86.01
11.06
12.1
33.8
2.8
24.9
9.2
135.80
203.15
67.35
30.3
26.8
3.4
16.3
7.6
153.85
182.73
28.88
39.4
20.3
3.2
13.5
6.2
-60
174.12
0.52
3.9
3.38
17.1
42.1
15.1
6.5
2.2
22.62
55.95
33.33
16.4
35.3
3.7
22.0
9.3
61.48
78.62
17.14
12.6
37.0
4.3
24.7
9.8
93.29
161.39
68.10
35.9
22.3
3.3
14.5
7.0
141.40
157.25
15.85
45.5
15.6
2.5
11.0
5.3
-60
260.72
133.31
141.66
8.35
11.8
40.5
7.5
19.7
9.1
144.70
249.97
105.27
31.2
24.9
3.6
16.4
7.6
171.06
247.56
76.50
35.2
22.0
3.4
14.7
7.2
231.82
247.56
15.74
44.2
17.1
3.1
11.5
5.2
-60
%S
0.42
0.22
0.26
0.09
0.12
0.10
0.29
0.38
0.05
0.20
0.17
0.23
0.17
0.22
0.22
0.24
0.19
0.00
0.04
0.01
0.32
0.00
0.18
0.06
0.01
0.01
0.02
0.04
0.17
0.37
0.03
0.10
0.11
0.18
Note: all location and distance measurements in metres, collars picked up using DGPS.
These assay results confirm the magnetic susceptibility measurements and show a 50 to
100m true thickness zone of iron mineralisation is present in the northern part of the tenement
2|Page
over a strike of at least 600m and most probably over plus 1,500m as suggested by the
magnetic anomaly. The location of the Northern Zone drill holes is shown in Figure 1.
Northern
Zone
Figure 1.
Northern Zone drill hole locations.
Drill holes BEKD50 to 53 intercepted iron mineralisation to depths of over 200m from surface
and over 300m downdip, see Figure 2 and 3, with true thicknesses estimated at between 50
and 106m. Cross sections for drill holes BEKD02, 25 to 27 and BEKD 23 and 24 are included
in Appendix 1.
With reference to Figure 2 and 3 below, these deeper drill holes are at a 200m north-south
drill spacing and a 100m east-west drill spacing within an area that extends over some 600m
by 200m and at a maximum depth to some 270m downdip. These westerly dipping iron
formations have true widths varying from around 67.35m (BEKD51) up to 105.5m (BEKD53)
and it is our expectation that these drilling results should all come together and provides good
evidence for significant tonnages of iron mineralisation in the Northern Zone.
3|Page
True Thickness
~67.4m
Figure 2.
Northern Zone cross Section 7,612,100N covering drill holes BEKD01, 19, 50 and 51. High-grade ~64%Fe
at surface and continuous iron mineralisation downdip to plus 260m. BEKD01, 50m north of BEKD19,
upgraded to 63%Fe using wLIMS, would expect comparable results from within this iron formation.
True Thickness
105.5m
Figure 3.
Northern Zone cross Section 7,612,300N covering BEKD20, 52 and 53. High-grade ~64%Fe at surface
and continuous iron mineralisation downdip to plus 270m.
Several of the drillholes intersected the mineralisation zone where it outcrops, and these have
returned several high-grade intercepts such as 64.7%Fe from surface to 6.9m, 63.9%Fe from
4|Page
surface to 4.6m and 63.7%Fe from surface to 3.9m downhole in drill holes BEKD01, BEKD19
and BEKD24 respectively, see cross sections above and Figure 4 below. These iron grades
are DSO equivalent, meaning they only require to be mined, crushed, and screened to
produce benchmark grade 62%Fe, or better, as lump and fines products and could potentially
represent a “quick-start” operation option.
64.9% Fe
62.7% Fe
63.7% Fe
65.9% Fe
Figure 4a
BEKD01 surface to 6.54m average grade of 63.98%Fe, 4.2% Silica, 2.7% Alumina, 0.05%P, 0.015%S
67.8% Fe
68.3% Fe
67.5% Fe
66.9% Fe
Figure 4b
BEKD19 surface to 3.87m average grade of 63.9%Fe, 4.0% Silica, 3.7% Alumina, 0.06%P, 0.002%S
62.1% Fe
62.1% Fe
65.6% Fe
65.2% Fe
Figure 4c
BEKD24 surface to 3.86m average grade of 63.8%Fe, 3.9% Silica, 3.9% Alumina, 0.03%P, 0.004%S
5|Page
Figure 5 below shows drill core sections from drill hole BEKD01, near surface and at depth to
65.0m downhole. These drill core photographs/composites are in approximately 6m
groupings, representative of the likely height of the mining benches, and for each composite
interval the drill core photos are accompanied by a description of the iron mineralisation type,
the average composites iron head grade and the resultant upgraded wLIMS and DTT product
grade. As previously, these wLIMS process trial composites were crushed to 2mm and had
an average of 80% passing 1.3mm while DTT product grade trials were performed on assay
pulps samples prepared to 75-microns with 80% passing 62-microns, a relatively coarse DTT
sizing.
Composite 1,
0 to 8.0m, comprising Weathered
Massive iron mineralisation.
Average head grade 60.6%Fe
Average wLIMS fines grade
67.6%Fe
Average DTT grade
69.9%Fe
Composite 5
26.54m to 32.3m, comprising
Coarse Disseminated iron
mineralisation.
Average head grade
38.9%Fe.
Average wLIMS fines grade
63.4%Fe
Average DTT grade
70.1%
BEKD01 - 58.54m to 65.0m
comprising Coarse Disseminated
iron mineralisation.
Average head grade
42.6%Fe.
Average wLIMS fines grade
TBC
Average DTT grade
70.1%
Figure 5.
BEKD01 drill hole within the Northern Zone of the Bekisopa strike length showing the near surface
composite 1, average head grade 60.6%Fe upgraded to 67.6%Fe by wLIMS and to 69.9%Fe by DTT.
Similarly, BEKD01 drill core composite 5 from 26.54 to 32.3m at average head grade of 38.9%Fe upgraded
to 63.4%Fe by wLIMS and to 70.1%Fe using DTT magnetic separation.
At depth of 58.54m to 65m the average head grade of 42.6%Fe is upgraded using DTT magnetic
separation to 70.1%Fe.
6|Page
wLIMS and DTT process trials on Bekisopa Central Zone BEKD01 and BEKD19
In conjunction with the assaying, AKORA also conducted wLIMS and DTT process trials on
continuous drill core composites and intervals from surface to 43.54m downhole on BEKD01,
wLIMS product grades averaged 63%Fe and DTT product grades averaged 69.8%Fe. The
objective of these processing trials being to better understand the upgradability of the iron
mineralisation near surface to 43.54m downhole. These results could potentially be similar
across the entire Northern Zone. DTT’s on BEKD19 delivered comparable iron product grade
of 70.2%Fe from surface to 35.32m downhole
The recent wLIMS and DTT trials were on composites of adjacent drill core intervals from
Bekisopa 2020 drill hole BEKD01 and 19, which are centrally located within the Northern Zone.
Each wLIMS composite included 6 to 8 adjoining samples, covering around 6m in length,
typical height of a mining bench.
The full wLIMS and DTT process trials on BEKD01 are summarised in Table 1 and 2 and show
that an average iron head grade of 45.1%Fe readily upgrades to 63%Fe and 69.8%Fe
respectively for iron mineralisation from surface to 43.54m downhole. A feature of the
Bekisopa iron mineralization is its ability to be readily upgraded using conventional magnetic
separation processes. wLIMS and DTT are both versions applying magnetic separation
techniques and are chosen dependent on the feed sizing to be evaluated.
Head Grade
wLIMS Iron Fines Grade
BEKD01
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 8.0
8.0 – 13.54
13.54 – 20.27
20.27 – 26.54
26.54 – 32.30
32.30 – 37.75
37.75 – 43.54
60.6
49.6
45.1
42.5
38.9
31.4
47.5
6.6
15.1
16.7
17.1
18.9
24.8
12.8
2.8
2.9
4.4
4.4
3.5
5.6
2.4
45.1
16.0
3.7
Averages
Fe
%
Silica %
Alumina
%
67.6
63.6
63.3
60.5
63.4
59.5
63.0
1.5
4.3
4.0
5.3
4.0
6.8
4.1
1.4
2.0
2.1
2.5
1.6
2.4
1.3
63.0
4.3
1.9
Table 1
Details of the wLIMS iron fines grade from the six composites from Bekisopa drill hole BEKD01 which
has shown an average iron head grade, of 45.1%Fe, being readily upgraded at a 2mm crush and magnetic
separation to produce an average 63.0%Fe high-grade fines product and average iron recovery of 95.2%.
Head Grade
Davis Tube Test Grade
BEKD01
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 8.0
8.0 – 13.54
13.54 – 20.27
20.27 – 26.54
26.54 – 32.30
32.30 – 37.75
37.75 – 43.54
60.6
49.6
45.1
42.5
38.9
31.4
47.5
6.6
15.1
16.7
17.1
18.9
24.8
12.8
2.8
2.9
4.4
4.4
3.5
5.6
2.4
45.1
16.0
3.7
Averages
Fe
%
Silica %
Alumina
%
69.9
69.6
69.6
69.4
70.1
70.1
69.9
0.7
0.8
0.7
0.8
0.4
0.5
0.4
0.8
0.7
0.8
0.7
0.6
0.8
0.5
69.8
0.6
0.7
Table 2
Details of the DTT iron grade from the six composites from Bekisopa drill hole BEKD01 which has shown
an average iron head grade of 45.1%Fe being readily upgraded using the DTT to an average iron grade of
69.8%Fe with an average silica grade of 0.6% and average alumina grade of 0.7%.
7|Page
The correlation between assay results and the product grade trials, wLIMS and DTT, looks to
be high and reproducible. Drill hole BEKD01 in the middle of the northern drill grid has been
tested for the product grade potential using magnetic separation techniques of wLIMS and
DTT and expectation is that these results in all reasonable probability would be reproduced
across the northern drill holes. Figure 6 and 7 below shows the relationship between the
assay results and the wLIMS and DTT process trial results completed on drill hole BEKD01.
As previously shown in the Central Zone, ASX Announcement 13 January 2022, and
continues to be the case in the Northern Zone drill holes the correlation is very high with the
assaying results and as expected with the wLIMS and DTT upgraded iron results.
In all reasonable probability we would expect the wLIMS and DTT results, at a 2mm crush size
and a 75-micron sizing, to achieve comparable very high-grade iron product grades, down
hole in BEKD01 and across the various Northern Zone drill holes. The DTT results on drill
core from 43.54m to 70.5m downhole on BEKD01 averaged 70.0%Fe which compares very
well with the average DTT iron grade from surface to 43.54m downhole of 69.9%Fe.
BEKD01 - Head Grade (%Fe) V WLIMS Product
(%Fe)
Surface
wLIMS
63%Fe
Average
43.54m
grade
70.5m
-100.00
-50.00
0.00
50.00
100.00
Figure 6.
BEKD01 drill hole within the Northern Zone of the Bekisopa project showing upgrading of iron mineralisation using
wLIMS, after a coarse 2mm crush, achieved excellent iron upgrading along all seven continuous near surface
composites, averaging 63%Fe. It is considered in all reasonable probability that the high assay results at depth to
70.5m would achieve similar high wLIMS fines grades at depth.
BEKD01 - Head Grade (%Fe) V DTT (%Fe)
Surface
DTT
69.9%Fe
average
grade
70.5m
-80.00
-60.00
-40.00
-20.00
0.00
20.00
40.00
60.00
80.00
Figure 7.
BEKD01 drill hole within the Northern Zone of the Bekisopa project showing upgrading of iron
mineralisation using DTT at a relatively coarse 75-microns, achieved excellent iron upgrading along all
composites from near surface to 70.5M down hole, averaging 69.9%Fe.
8|Page
As noted in Figure 7 the magnetic separation using DTT on BEKD01 at a relatively coarse 75micron sizing has delivered an average product grade of 69.9%Fe at a 57.3% mass yield and
overall iron recovery of 91% from the surface to 70.5m downhole trials.
These outstanding iron concentrate grades at a relatively coarse 75-micron sizing shows
promise for Bekisopa to be able to deliver DRI pellet grade to meet the growing demand from
decarbonisation in the iron and steel industry by the increased production demand for DRI
pellets. Premium grade iron feed, with very low impurity levels as seen from BEKD01, Table
3, is what is forecast to be required to produce DRI pellets from natural gas or green hydrogen
iron making processes. Bekisopa in Madagascar is well placed to provide these growing
markets that have an abundance of natural gas, for example the Middle East, or those
locations that will be producing green hydrogen.
DTT product show very high iron grades, averaging ~70%Fe, with low impurities, Table 3.
BEKD01
Surface to
43.54m
43.54m to
70.5m
Surface to
70.5m
Head
Grade
45.1
DTT %Fe
69.8
DTT
%Silica
0.6
DTT
%Alumina
0.7
DTT %P
DTT %S
0.004
0.007
40.7
70.1
0.4
0.6
0.003
0.06*
43.3
69.9
0.5
0.7
0.003
0.05*
Table 3
BEKD01 DTT average iron grades and impurity levels for the surface to 43.54m downhole and from
surface to 70.5m downhole consistent and impressively low. Note *: The higher S levels at depth is
likely due to the presence of pyrite, iron sulfide.
%Fe
BEKD01 DTT and wLIMS (%Fe) V Head Grade (%Fe)
72
70
68
66
64
62
60
58
25
35
45
Head Grade - %Fe
55
65
Figure 8.
Process trial product grade assay results from Bekisopa drill hole BEKD01 on seven composites from surface to
43.54m downhole. The wLIMS results, red markers, averaged 63%Fe. The DTT results, black markers, delivered
outstanding 69.8%Fe average grade. The DTT product grades from depths of 43.54 to 70.5m downhole averaged
70.1%Fe, best at 70.4%Fe, blue markers, shows the consistency of achieving premium product grades over 70.5m
downhole in BEKD01.
As shown from BEKD01, in Figure 8 above, that iron head grade composites >25%Fe readily
upgrade averaging 63%Fe which is better than benchmark iron product grade of 62%Fe, after
magnetic separation at a coarse 2mm crush. In all reasonable likelihood comparable head
grades from around this drill hole and within the Northern Zone would be expected to upgrade
9|Page
similarly. Table 3 and Figure 8 show the DTT product grades are outstanding averaging
69.9%Fe for head grades from 25%Fe to 65%Fe, at average mass yield of 57.3%. Then at
depth from 43.54m to 70.5m downhole DTT product grades averaging 70.1%.
Across the Northern Zone, DTT for iron head grades from 15% to 25% shows very clean and
high-quality concentrate grades averaging 69.8%Fe, from an average head grade of 21.1%Fe
at a DTT mass yield of 24.4% and iron recovery of 80%, see Figure 9. These are excellent
DTT results at a relatively coarse grind of 75-microns, achieving a P80 of 62 microns, and if
this was a necessary processing stage for lower grade Bekisopa iron mineralisation it looks to
be capable of clearly delivering a premium high-quality DRI concentrate which is the way the
Green Steel Industry looks to be heading as one main way to reduce their carbon emissions.
Bekisopa Northern Zone - DTT Grade (%Fe) V Head Grade (15 to 25%Fe)
100.00
80.00
60.00
40.00
20.00
0.00
Figure 9.
Northern Zone head grades from 15 to 25%Fe (red line) deliver a DTT product grade averaging 69.8%Fe
(black line). Premium iron product grade at a relatively coarse grind size of 75-microns.
Conclusion
The Bekisopa Northern Zone drilling assays show significant volumes of readily upgradeable
iron mineralisation are present and that mineralisation continues at plus 300m downdip from
surface.
In addition, several high-grade zones of up to 64%Fe are present at surface across several
holes down to 6.9m downhole, and this is expected to be suitable for DSO at better than
benchmark grade.
The Northern Zone comprises nine shallow drill holes with high near surface iron grades, up
to 64%Fe, and four very deep holes, of 138.2m, 220.65m, 174.12m and 260.72m in BEKD50
to 53 respectively, with an overall average grade of 33.1%Fe, with numerous mid-intercept
grades of 44 to 55%Fe. Iron grades have been shown via test work on a single hole (BEKD01)
to readily upgrade using wLIMS magnetic separation to an average of 63%Fe after at -2mm
crush and then to 69.9%Fe after DTT processing at -75µm grind.
DTT performed on BEKD01 from surface to 70.5 metres downhole, an average of 43.3%Fe,
delivered a product averaging 69.9%Fe at very low impurity levels of 0.5% Silica, 0.7%
Alumina, 0.003% Phosphorous and 0.06% Sulphur, very encouraging results indicating that
Bekisopa could potentially be a future provider of very clean premium grade iron ore suitable
for DRI pellet production - the crucial feed material for the iron and steel industry to
decarbonise and produce Green Steel.
10 | P a g e
For further information please contact:
Paul G Bibby
Managing Director
Phone +61(0) 419 449 833
www.akoravy.com
Peter Taylor
Investor Relations
Phone +61(0) 412 036 231
Peter@nwrcommunications.com.au
About AKORA Resources
AKORA Resources (ASX: AKO) is an exploration company engaged in the exploration and
development of the Bekisopa Project, the Tratramarina Project and the Ambodilafa Project,
iron ore projects in Madagascar, in all totaling some 308 km2 of tenements across these three
prospective exploration areas. Bekisopa Iron Ore Project is a high-grade magnetite iron ore
project of >4km strike and is the key focus of current exploration drilling and resource
modelling.
Competent Person’s Statement
The information in this report that relates to Exploration Targets, Exploration Results, and related
scientific and technical information, is based on, and fairly represents information compiled by Mr
Antony Truelove. Mr Truelove is a consulting geologist to Akora Resources Limited (AKO). He is a
shareholder in Akora Resources Limited, holding 4,545 Shares he purchased in 2011, some 8 years
prior to being engaged as a consultant. Mr Truelove is a Member of the Australasian Institute of Mining
and Metallurgy (MAusIMM) and a Member of the Australian Institute of Geoscientists (MAIG). Mr
Truelove has sufficient experience which is relevant to the styles of mineralisation and types of deposits
under consideration and to the activity which he is undertaking to qualify as a Competent Person as
defined in the JORC Code. Mr Truelove consents to the inclusion in this report of the matters based
on his information in the form and context in which it appears including sampling, analytical and test
data underlying the results.
Competent Person’s Statement
The information in this report that relates to Mineral Processing and related scientific and technical
information, is based on, and fairly represents information compiled by Mr Paul Bibby. Mr Bibby is a
Metallurgist and Managing Director of Akora Resources Limited (AKO), as such he is a shareholder in
Akora Resources Limited. Mr Bibby is a Fellow of the Australasian Institute of Mining and Metallurgy
(FAusIMM). Mr Bibby has sufficient experience which is relevant to the styles of mineralisation and its
processing under consideration and to the activity which he is undertaking to qualify as a Competent
Person as defined in the JORC Code. Mr Bibby consents to the inclusion in this report of the matters
based on his information in the form and context in which it appears including analytical, test data and
mineral processing results.
Authorisation
This announcement has been authorised by the AKORA Resources Board of Directors on 27
January 2022.
11 | P a g e
Appendix 1
The Northern Zone comprises 13 drill holes of depths from 14.9m (BEKD27) up to
260.72m (BEKD53) for a total of 1,239.1m. Previously ASX Announcements have covered
the drilling details of BEKD01 and 02 (Announcement 13 April 2020), then BEKD19 and 20
(ASX Announcement 20 July 2020), for BEKD23 to 27 (ASX Announcement 17 August 2020).
Bekisopa 2021 drilling details for drill holes BEKD50, 51 ,52 and 53 are shown in Table 1.
Hole
ID,
BEKD
Utm38sX
*
Utm38sY*
Azm
Degrees
Incline
Degrees
Length
m
TCR
%
50
585,999.7
7,612,098.6
90
-60
138.20
99
51
585,900.1
7,612,099.5
90
-60
220.65
99
52
585,899.4
7,612,299.5
90
-60
174.12
97.5
53
585,798.4
7,612,299.9
90
-60
260.72
98.4
From
m
To
m
Length
m
Mineralisation
0.00
39.68
40.24
49.31
125.65
0.00
16.86
21.06
135.80
202.50
0.00
29.49
48.12
61.48
65.47
76.20
78.62
88.67
161.39
0.00
144.70
249.97
39.68
40.28
49.31
125.65
138.20
16.86
21.06
135.80
202.50
220.65
29.49
48.12
61.48
65.47
76.20
78.62
88.67
161.39
174.12
143.77
249.97
260.72
39.68
0.6
9.07
76.34
3.54
16.86
4.20
114.74
66.70
18.15
29.49
18.63
13.36
3.99
10.73
2.42
10.05
72.72
12.73
143.77
105.27
10.75
Gneiss
Iron
Gneiss
Iron
Gneiss
Gneiss
Iron
Gneiss
Iron
Gneiss
Gneiss
Iron
Gneiss
Iron
Gneiss
Iron
Gneiss
Iron
Gneiss
Gneiss
Iron
Gneiss
Table 1
Drill hole locations and iron mineralisation intercepts for BEKD50 to BEKD53 from the Bekisopa 2021
drilling campaign. Note that co-ordinates are from handheld GPS only and will be accurately surveyed at
completion of the drilling programme.
Significant Iron Intercepts
Assay results for all Northern Zone drill holes BEKD01, 02, 19, 20, 23, 24, 25, 26, 27, 50, 51,
52 and 53 from the 2020 and 2021 drilling campaign have now been received and compiled
and show the following significant iron intercepts:
Note: Bold text represents overall intercepts, normal text sub-intercepts; blue text intercepts averaging over 50% Fe.
Hole
Number
BEKD01
incl.
incl.
and
also incl.
From
(m)
0.0
0.0
0.0
18.4
25.5
To
(m)
70.5
25.5
6.9
21.2
70.5
BEKD02
incl.
14.2
22.5
BEKD19
0.0
7.12
7.12
incl.
12 | P a g e
Interval
SiO2
(%)
17.0
13.5
4.2
5.0
18.7
Al2O3
(%)
3.4
3.5
2.7
2.1
3.4
P
(%)
0.12
0.10
0.05
0.10
0.13
S
(%)
Comments
0.29
0.006
0.02
0.002
0.4
Coarse Disseminated Iron
25.5
6.9
2.8
45.0
Fe
(%)
43.3
50.3
64.0
62.5
39.9
28.6
27.3
14.4
4.8
39.2
50.7
15.6
8.8
3.5
1.9
0.13
0.16
0.02
0.003
Coarse Disseminated Iron
Massive Iron Mineralisation
4.59
35.32
24.50
4.59
28.20
17.38
63.9
41.2
47.0
3.9
18.1
15.6
3.7
2.9
2.7
0.06
0.15
0.17
0.002
0.005
0.07
Weathered Massive Iron
Coarse Disseminated Iron
Fine Disseminated Iron
(m)
70.5
Massive Iron Mineralisation
Weathered Massive Iron
Massive Iron Mineralisation
Coarse Disseminated Iron
and incl.
12.58
23.50
10.92
50.2
13.2
2.1
0.15
0.003
Massive Iron Mineralisation
BEKD20
incl.
0.0
0.0
38.56
18.40
7.0
44.67
18.40
7.0
16.11
41.3
45.6
40.5
19.1
16.9
19.2
3.4
4.4
3.7
0.15
0.13
0.13
0.008
0.004
0.83
Coarse Disseminated Iron
Weathered Coarse Iron
Coarse Disseminated Iron
BEKD23
0.0
24.03
2.23
32.84
2.23
8.81
59.5
32.7
6.6
21.6
5.4
2.7
0.05
0.10
0.002
0.003
Weathered Massive Iron
Coarse Disseminated Iron
BEKD24
0.0
9.14
19.21
4.20
42.0
3.90
13.16
24.30
13.81
46.72
3.90
4.02
5.09
9.61
4.72
63.8
50.4
53.6
55.2
37.8
3.9
11.8
9.1
9.9
19.6
3.9
1.8
2.6
2.7
2.7
0.04
0.26
0.71
0.12
0.09
0.004
1.28
0.03
0.006
0.27
Weathered Massive Iron
Massive Iron Mineralisation
Massive Iron Mineralisation
Weathered Massive Iron
Coarse Disseminated Iron
BEKD26
0.0
26.48
37.44
1.11
29.00
38.98
1.11
2.52
1.54
53.1
40.8
43.4
13.9
13.9
4.6
6.4
3.1
1.6
0.37
0.08
0/08
0.012
0.002
0.017
Weathered Massive Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
BEKD27
0.0
6.98
4.08
12.55
4.08
5.57
42.3
31.3
21.9
25.8
7.1
5.5
0.02
0.09
0.002
0.032
Weathered Coarse Iron
Coarse Disseminated Iron
BEKD50
39.68
49.31
54.52
76.60
101.7
120.2
40.28
125.7
64.08
83.50
113.0
125.7
0.6
76.34
41.1
36.2
48.6
43.7
40.5
50.0
13.9
22.1
12.0
17.4
18.9
12.0
3.6
3.1
2.4
2.9
2.9
2.7
0.42
0.22
0.42
0.18
0.20
0.09
0.006
0.038
0.009
0.016
0.006
0.33
Coarse Disseminated Iron
16.86
135.8
153.8
170.0
21.57
203.2
167.2
182.7
4.71
44.2
26.8
16.6
21.1
2.3
3.4
2.9
3.6
0.12
0.29
0.51
0.28
0.004
0.059
0.011
0.015
Fine Disseminated Iron
Fine Disseminated Iron
13.37
5.73
26.4
30.3
44.3
38.0
34.92
88.67
93.29
105.7
120.2
125.4
141.4
40.00
161.4
96.78
113.2
124.0
157.3
157.3
5.08
72.72
3.49
7.5
3.8
31.9
15.85
27.3
33.9
38.9
39.9
42.1
40.1
45.5
27.3
23.7
19.9
20.1
18.3
19.1
15.6
2.7
3.6
3.2
2.4
3.1
3.1
2.5
0.49
0.23
0.49
0.40
0.24
0.20
0.17
0.017
0.167
0.068
0.027
0.032
0.234
0.37
Fine Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
143.8
171.1
197.3
207.2
231.8
249.3
184.2
205.3
226.9
247.6
105.5
31.3
36.1
36.6
38.7
43.8
25.3
21
20.9
20.6
17.3
3.6
3.1
3.3
3.1
3.1
0.22
0.32
0.22
0.28
0.20
0.099
0.034
0.015
0.123
0.169
Coarse Disseminated Iron
BEKD25
incl.
incl.
incl.
incl.
BEKD51
incl.
incl.
BEKD52
incl.
incl.
incl.
incl.
BEKD53
incl.
incl.
incl.
incl.
9.56
6.90
11.3
5.45
67.35
13.1
8.0
19.7
15.8
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Massive Iron Mineralisation
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
Coarse Disseminated Iron
(Note: Bold represents overall intercepts, sub-intercepts normal text; blue text highlights intercepts averaging
over 50% Fe).
13 | P a g e
Figure 1:
Northern Zone cross section 7,611,900N covers drill holes BEKD23 and 24. 63.7%Fe and 59.5% at
surface grades potentially suitable for DSO, continuing iron mineralisation downdip.
Figure 2.
Northern Zone cross section 7,611,700N covers drill holes BEKD02 from the 2020 drilling and BEKD 25 to
27 from the 2021 drilling campaign.
14 | P a g e
JORC Code
Table 1 Section 1 Sampling Techniques and Data
BEKISOPA PROJECT
Criteria
Sampling
techniques
Drilling
techniques
15 | P a g e
JORC Code explanation
• Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate calibration
of any measurement tools or systems used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.
submarine nodules) may warrant disclosure of
detailed information.
• Drill type
Share your feedback
Discover