Bekisopa Southern Zone Extends Iron Ore Strike to 5km
Released
Released
Announcement PDF
ASX Release
2 March 2022
AKORA Resources - Bekisopa Southern Zone Results:
AKORA Resources Managing Director Paul Bibby, commented that “These final
Southern Zone assay and processing trial results clearly indicate that AKORA has
identified an outstanding iron ore project at Bekisopa. The assays along the 5-kilometre
strike length and high-grade processing trial results, up to 70%Fe, in all three zones,
Northern, Central and now Southern, show that AKORA will likely be able to develop an
initial DSO project then a significant future operation that could provide Direct Reduction
Iron feed, at +68%Fe and very low impurities, that will be required to advance the
decarbonisation of the iron and steel industry.”
Highlights:
•
+64%Fe in substantial surface intercepts suitable for DSO:
✓ 8.2m @ 68.2%Fe, 6.3m @ 66.8%Fe, 4.5m @ 65.5%Fe, 6.9m @
65.5%Fe, 14.7m @ 64.9%Fe and 4.9m @ 64.65%Fe in BEKD31, 29,
33, 16, 13 and 44 respectively
•
+63%Fe in substantial intercepts at depth suitable for DSO:
✓ 19.5m @ 63.3%Fe, 12.3m @ 64.7%Fe, 15.6m @ 63.4%Fe, 11.0m @
63.9%Fe, 9.2m @ 64.6%Fe and 7.5m @ 64.9%Fe in BEKD46, 46, 11,
45, 32 and 56 respectively
•
Significant iron mineralisation widths in the Southern Zone including:
o
o
o
o
BEKD45 - 79.5m @ 41.2%Fe including 62.5m @ 46.2%Fe
BEKD43 - 146.1m @ 38.4%Fe including 70.4m @ 46.1%Fe
BEKD59 - 150.9m @ 33.2%Fe including 113.3m @ 39.3%Fe
BEKD46 - 155.6m @ 37.1%Fe including 105.2m @ 42.1%Fe
•
Mineral processing trials suggests plus 30%Fe can be readily upgraded
using comminution and magnetic separation in BEKD10 and 34 to:
o +62% and +65%Fe fines at a -2mm crush
o 69.3% and 69.5%Fe product at a -75µm grind, respectively
•
+69%Fe product grade achieved in BEKD10 and BEKD34, and potentially
across the entire Southern Zone, is suitable for DRI pellets crucial for
future decarbonisation of the steel industry and Green Steel production
•
5,000 metres of iron mineralisation confirmed along the Southern, Central
and Southern Zones indicating potential for a significant JORC Resource
1|Page
Introduction
AKORA Resources (“AKORA” or “the Company”) (ASX Code: AKO) is pleased to provide
shareholders with the assay results for Southern Zone drill holes BEKD09 to 18, BEKD28 to
36, BEKD43 to 49 and BEKD554 to 63, in total 37 drill holes, plus processing trial reporting
on Bekisopa drill holes BEKD10 and BEKD34 within Bekisopa tenement 10430. The drilling
details for drill hole BEKD09 to 12 are covered in ASX Announcements of 27 April 2021,
BEKD13 to 18 in ASX Announcements 20 July and 19 October 2021, BEKD28 to 35 in ASX
Announcements 17 August and 3 November 2021, BEKD36 in ASX Announcement 14
September and 3 November 2021 and the first deep hole BEKD43 on 26 September 2021.
Across the Southern Zone drill holes there are high-grade near surface assays +64%Fe,
clearly indicates the potentially Direct Ship Ore (DSO) lump and fines, in 13 of the 29 drill
holes that intercepted iron mineralisation at surface with 14.6m @ 64.94%Fe in BEKD13,
8.19m @ 68.15%Fe in BEKD31, 5.88m @ 63.87%Fe from 0.9 to 6.78m in BEKD44. At depth
7 drill holes recorded substantial iron intercepts grading +63%Fe with 19.5m @ 63.26%Fe
from 68.1m downhole in BEKD46 and 11m @ 63.96%Fe from 56.8m downhole in BEKD45.
Drill holes intercepted iron mineralisation deep downhole in several Southern drill holes;
155.64m continuous iron intercept ending at 172.74m at an average 37.05%Fe in BEKD46,
150.85m continuous iron intercept ending at 173.94m at an average 33.20%Fe in BEKD59
and 146.07m continuous iron intercept ending at 182.47m at an average 38.42%Fe
including 70.41m at 46.14%Fe in BEKD43, refer Appendix 1, Significant Iron Intercepts.
Drill holes BEKD10 and 34 were extensively evaluated using magnetic separation techniques,
wet Low Intensity Magnetic Separation (wLIMS) and Davis Tube Tests (DTT), to better
understand the capacity of AKORA to achieve high-grade products along these drill holes.
There is potential for the mineralisation to extend across the entire Southern Zone.
Preliminary processing trial results for BEKD10, on the eastern side of the Southern Zone,
from surface to 37.2m downhole showed this mineralisation readily upgraded at a 2mm crush
to 62.4%Fe and at a 75-micron sizing to an outstanding 69.3%Fe. The same processing trials
on BEKD34, on the western side of the Southern Zone, delivered 66%Fe after a 2mm crush
and 69.5%Fe at a 75-micron sizing using magnetic separation, all with substantial reduction in
impurities. These processing trials show the consistency of upgradability across the expansive
Southern Zone and largely replicate the results achieved on the Northern and Central Zones
and therefore, along the main 5-kilometer strike length.
Drilling details for all drill holes not previously reported for the Southern Zone are included in
Appendix 1 attached, as are the significant iron intercepts for all Southern Zone drill holes.
Southern Zone Assay Results
Near surface assay results shows high-grade average iron grade across numerous drill holes;
68.2%Fe, 66.8%Fe, 65.9%Fe, 65.5%Fe, 65.5%Fe, 64.9%Fe and 62.9%Fe from surface to
8.2m, 6.2m, 2.2m, 6.9m, 14.7m and 6.8m, respectively downhole in Southern drill holes
BEKD31, 29, 17, 16, 13 and 44, see Figure 1.
Assay results from depths downhole also contain some high-grade iron intercepts; 4.2m @
66.1%, 7.5m @ 64.9%, 13.3m at 64.4%, 9.2m @ 64.6%, 11m @ 64% and 19.49m @ 63.3%
in BEKD33, 56, 46, 32, 45 and 46 respectively. These iron grades are DSO meaning they
only require to be mined, crushed and screened to produce benchmark grade 62%Fe, or
better, as lump and fines products.
2|Page
Assay results for Southern Zone drill holes BEKD43 to 63 are included in Appendix 1 attached,
with highlight intercept results for BEKD43 to 63 noted in Table 1 below.
Hole
Number
BEKD43
incl
BEKD44
BEKD45
incl
BEKD46
incl
incl
BEKD47
incl
BEKD48
incl
BEKD49
incl
BEKD55
incl
BEKD56
incl
BEKD57
incl
BEKD58
BEKD59
incl
incl
BEKD63
incl
From
(m)
35.81
84.33
0.00
36.46
56.85
16.10
68.13
88.95
0.00
56.4
0.00
43.30
0.00
22.50
0.00
0.00
14.61
22.81
0.00
55.04
46.88
23.09
60.67
74.33
84.18
85.00
To (m)
Interval
Fe (%)
185.4
96.90
21.24
115.9
67.80
178.9
87.62
102.2
80.45
64.4
56.64
56.64
28.17
28.17
25.39
6.14
60.90
30.34
82.28
67.87
89.16
173.9
99.86
90.11
106.3
90.35
(m)
159.6
12.57
21.24
79.44
10.95
162.8
19.49
13.25
80.45
8.00
56.64
13.34
28.17
5.67
25.39
6.14
46.29
7.53
82.28
12.83
42.28
150.8
39.19
15.78
22.12
5.35
37.6
52.8
42.3
41.2
64.0
35.9
63.3
64.4
27.1
50.0
30.4
41.0
41.0
53.3
35.5
60.7
44.1
64.9
30.8
53.6
27.4
33.2
52.4
60.7
40.6
50.9
SiO2
(%)
19.3
5.5
23.8
17.7
2.5
20.1
3.7
2.5
30.7
12.4
23.9
11.4
22.7
11.5
28.2
3.7
14.3
1.8
26.2
6.5
28.9
22.7
9.5
4.0
12.5
8.3
Al2O3
(%)
2.8
1.1
4.1
2.6
0.9
2.7
1.1
0.7
3.9
2.3
2.9
1.5
4.2
2.1
6.7
4.9
2.5
0.8
2.9
1.1
3.1
2.6
1.6
1.1
2.1
1.9
P (%)
S (%)
0.240
0.261
0.115
0.283
0.403
0.145
0.143
0.1401
0.096
0.198
0.127
0.138
0.222
0.188
0.099
0.106
0.215
0.195
0.162
0.227
0.140
0.213
0.251
0.279
0.131
0.123
0.200
0.254
0.093
0.113
0.039
0.198
0.083
0.124
0.695
1.485
1.204
3.457
0.138
0.389
0.011
0.036
1.656
0.285
1.516
3.441
1.238
0.207
0.450
0.445
0.907
0.112
Table 1.
2021 drilling campaign significant intercepts and assay results. Several significant iron mineralisation
intercepts from 50 to 162.8m, numerous plus 50% iron head grades, shown in Bold Blue, several >63%Fe.
The full BEKD43 to 49 and BEKD54 to 63 intercept and assay results are shown in Appendix 1, Table 2.
These assay results confirm the on-site logging and magnetic susceptibility measurements
and show significant thicknesses of iron mineralisation ranging from 40 up to 162.8m
downhole are present in the Southern Zone of the tenement over a strike length of around
1,000m and most probably over plus 1,500m as suggested by the magnetic anomaly. The
location of the Southern Zone drill holes is shown in Figure 1.
The combined Northern, Central and Southern Zone assay results from drilling so far show
that the iron mineralisation is spanning some 5,000m of the overall 6-kilometer strike length,
North to South, with results covering some 700m across strike in the Southern Zone. The
assay results and upgradability to better than Benchmark grade using comminution and
magnetic separation, at relatively coarse sizing, to achieve high to Premium grade iron ore
products in each drill grid zone from north to south along the main 5-kilometer strike length.
3|Page
Tenement
3757
Tenement
Northern
10430
5 X 5 kms
Zone
Central
Zone
Southern
Zone
37
Drill Holes
Figure 1.
Southern Zone drill hole locations.
The Southern Zone mainly comprises 28 shallow drill holes, <100m, and 9 deep drill holes
from 139.6m to 208.8m with the deepest iron mineralisation intercepted being at 149.6m,
173.9m, 185.4m and 184.7m downhole in BEKD46, 59, 43 and 61 respectively. There are
substantial true thicknesses in a number of southern drill holes, several around 50m, then
BEKD47 and 57 at 80.5m and 82.3m, respectively, then BEKD59, 43 and 46 at 150.8m,
159.6m and 162.8m, respectively, which should add considerably to the resource estimate.
Cross sections for drill holes within the Southern Zone and shown in Figure 2(a) to (d), and
cross sections covering BEKD28 to 35 and BEKD12 and 36 are included in Appendix 1. The
Southern Zone drill holes are typically spaced at 150m in the north-south direction with a 50m
or 100m east-west spacing that extends across an area of over 850m by 1,000m and at a
maximum depth to some 185m downhole. These flat lying east-west iron formations have
true widths varying from around 80m (BEKD45 and 63) to 155m (BEKD58 and 59) and 170m
(BEKD46 and 62). It is our expectation that these drilling results should all come together and
provides good evidence for significant tonnages of iron mineralisation in the Southern Zone.
4|Page
7,608,450N
400m
Gneiss/Calc-silicate
Figure 2 (a).
Southern Zone cross Section 7,608,450N covering drill holes BEKD18 and BEKD55 to 60. High-grade
~66%Fe and ~61%Fe at surface in BEKD18 and 55 and at depth in BEKD56 7.5m @ 64.9%Fe and a
continuous 150.8m iron mineralisation intercept at 33.2%Fe in BEKD59.
7,608,300N
400m
Gneiss/Calc-silicate
Figure 2 (b).
Southern Zone cross Section 7,608,300N covering BEKD17, BEKD46 to 49, BEKD54 and BEKD61. Highgrade ~66%Fe and ~63%Fe at surface in BEKD17 and 54 and at depth in BEKD46 19.5m @ 63.3%Fe and
13.3m @ 64.4%Fe and a continuous 162.8m iron mineralisation intercept of 35.9%Fe in BEKD46.
5|Page
7,608,150N
Gneiss/Calc-silicate
Iron Formation
400m
Figure 2 (c).
Southern Zone cross Section 7,608,150N covering BEKD09 to 11, 13 and 14, 43, 62, 34 and 35. Highgrade at surface of 62%Fe, 65%Fe, 63%Fe in BEKD11, 13 and 34 and at depth 61.2%Fe, 63.3%Fe,
63.4%Fe, 63.7%Fe and 52.8%Fe in BEKD09, 10, 34, 35 and 43.
7,608,000N
400m
Figure 2 (d).
Southern Zone cross Section 7,608,000N covering BEKD15 and 16, 44 and 45, 63 and 32 and 33. Highgrade at surface of approximately 64%Fe, 65%Fe, 63%Fe, 62%Fe and 65%Fe in BEKD15, 16, 44, 32 and 33
and at depth approximately 64%Fe, 65%Fe and 63%Fe in BEKD45, 32 and 33.
6|Page
Twelve of the drillholes intersected the mineralisation zone where it outcrops, and these have
returned high-grade intercepts from 61% to 68%Fe from surface up to 14m downhole, refer
drill hole cross sections in Figure 2 (a) to (d), and the drill core sections in Figure 3 below.
These iron grades are DSO equivalent, meaning they only require to be mined, crushed and
screened to produce benchmark grade 62%Fe, or better, as lump and fines products and
could potentially represent a “quick-start” operation option.
66.2% Fe
64.8% Fe
64% Fe
66.3% Fe
Figure 3(a)
BEKD16 surface to 6.85m average grade of 65.5%Fe, 2.4% Silica, 2.9% Alumina, 0.07%P, 0.011%S.
67.8% Fe
68.5% Fe
68.5% Fe
69.3% Fe
Figure 3(b)
BEKD31 surface to 8.19m average grade of 68.2%Fe,1.4% Silica, 1.6% Alumina, 0.06%P, 0.007%S.
59.2% Fe
65.4% Fe
64.5% Fe
64.1% Fe
Figure 3 (c).
BEKD44 surface to 6.78m average grade of 62.9%Fe, 4.8% Silica, 3.9% Alumina, 0.04%P, 0.005%S.
Figures 4 and 5 below shows drill core sections from drill hole BEKD10 and 34, near surface
and at depth to approximately 37m downhole. These drill core photographs/composites are in
approximately 6m groupings, representative of the likely height of the mining benches, and for
7|Page
each composite interval the drill core photos are accompanied by a description of the iron
mineralisation type, the average composites iron head grade and the resultant upgraded
wLIMS and DTT product grades. As previously, these wLIMS process trial composites were
crushed to 2mm and had an average of 80% passing 1.3mm while DTT product grade trials
were performed on assay pulps samples prepared to 75-microns with 80% passing 62microns, a relatively coarse DTT sizing.
Have performed processing trials on two sets of drill core composites BEKD10 from the
eastern edge of the Southern Zone and then BEKD34 from the western side of the around
1,000m wide Southern Zone provides an excellent understanding of the upgradability of the
iron mineralisation across the expansive Southern Zone.
BEKD10 - Composite 1,
0 to 5.6m, comprising Weathered
Massive iron mineralisation.
Average head grade 56.6%Fe
Average wLIMS fines grade
67.7%Fe
Average DTT grade
68.3%Fe
Composite 4,
17.0m to 23.0m, comprising
Weathered Massive iron
mineralisation.
Average head grade
52.9%Fe.
Average wLIMS fines grade
66.9%Fe
Average DTT grade
69.8%
Composite 7,
33.6 to 37.2m, comprising Massive
iron mineralisation.
Average head grade
58.5%Fe.
Average wLIMS fines grade
67.5%Fe
Average DTT grade
68.9%
Figure 4.
BEKD10 drill hole within the Southern Zone of the Bekisopa strike length showing Composites 1, 4 and 7
upgraded to an average of 67.4%Fe by wLIMS and to an average of 69%Fe by DTT.
8|Page
BEKD34 - Composite 1,
0 to 4.9m, comprising Weathered
Massive iron mineralisation.
Average head grade 59.4%Fe
Average wLIMS fines grade
69.0%Fe
Average DTT grade
68.9%Fe
Composite 4
14.8m to 18.7m, comprising
Coarse Disseminated and Massive
iron mineralisation.
Average head grade
51.0%Fe.
Average wLIMS fines grade
65.0%Fe
Average DTT grade
70.4%
Composite 7,
comprising Coarse Disseminated
and Massive iron mineralisation.
Average head grade
45.6%Fe.
Average wLIMS fines grade
63.3%Fe
Average DTT grade
68.6%
Figure 5.
BEKD34 drill hole within the Southern Zone of the Bekisopa strike length showing Composites 1, 4 and 7
upgraded to an average of 65.8%Fe by wLIMS and to an average of 69.3%Fe by DTT.
wLIMS and DTT process trials on Bekisopa Central Zone BEKD10 and BEKD34
In conjunction with assaying, AKORA conducted wLIMS and DTT process trials on continuous
drill core composites and intervals from surface to approximately 37m downhole on BEKD10
and 34. These magnetic separation processing trials using wLIMS and DTT delivered product
grades averaging 64.2%Fe and 69.4%Fe across all composites from BEKD10 and 34. The
results across these composites are very comparable and could potentially be similar across
the entire Southern Zone. BEKD10 Composites 2 and 3 achieved lower wLIMS grades of
50.5% and 57.8%Fe, respectively, at lower than typical iron recoveries, this is believed due to
Hematite in those composites. Work is proposed to better understand these results.
The recent wLIMS and DTT trials were on composites of adjacent drill core intervals from
Bekisopa 2020 and 2021 drill holes BEKD10 and 34, which are from across the Southern
Zone, each composite included 6 to 8 adjoining samples, covering around 6m in length, typical
height of a mining bench. The full wLIMS and DTT process trials on BEKD10 and 34 are
summarised in Tables 2 and 3 and show that an average iron head grade of 50.5%Fe readily
9|Page
upgrades to 64.2%Fe and 69.4%Fe, respectively, for iron mineralisation from surface to ~37m
downhole across all drill hole composites. A feature of the Bekisopa iron mineralization is its
ability to be readily upgraded using conventional magnetic separation processes. wLIMS and
DTT are both versions applying magnetic separation techniques and are chosen dependent
on the feed sizing to be evaluated.
Head Grade
wLIMS Iron Fines Grade
BEKD10
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 5.62
5.62 – 11.37
11.37 – 17.0
17.0 – 23.0
23.0 – 28.9
28.9 – 33.6
33.6 – 37.2
56.6
32.5
38.7
52.9
52.0
44.2
58.5
11.9
31.0
25.5
12.9
14.2
15.8
6.7
3.3
3.9
4.3
3.4
3.2
2.4
1.7
67.7
50.5
57.8
66.9
65.5
61.2
67.5
2.2
16.2
9.7
2.0
3.4
5.1
1.0
1.8
2.5
2.5
1.6
1.6
1.2
0.5
47.9
16.8
3.2
wLIMS
62.4
3.2
1.7
Averages
Table 2(a)
Details of the wLIMS iron fines grade from the seven composites from Bekisopa drill hole BEKD10 which
has shown an average iron head grade of 47.9%Fe being readily upgraded at a 2mm crush and magnetic
separation to produce an average 62.4%Fe fines product and average iron recovery of 84.9%.
Head Grade
wLIMS Iron Fines Grade
BEKD34
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 4.9
4.9 – 10.43
10.43 – 14.8
14.8 – 18.7
18.7 – 23.0
23.0 – 29.36
29.36 – 34.8
59.4
62.1
41.1
51.0
54.1
59.2
45.6
7.2
4.7
18.2
8.6
4.9
3.5
6.9
2.7
1.6
1.8
1.5
1.1
0.9
1.3
69.0
68.1
64.3
65.0
66.2
66.0
63.3
0.6
1.0
3.3
2.5
1.6
1.5
2.5
0.9
0.9
0.6
0.7
0.7
0.7
0.8
53.2
7.7
1.6
wLIMS
66.0
1.9
0.8
Averages
Table 2(b)
Details of the wLIMS iron fines grade from the seven composites from Bekisopa drill hole BEKD34 which
has shown an average iron head grade of 53.2%Fe being readily upgraded at a 2mm crush and magnetic
separation to produce an average 66%Fe fines product and average iron recovery of 96.4%.
Head Grade
Davis Tube Test Grade
BEKD10
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 5.62
5.62 – 11.37
11.37 – 17.0
17.0 – 23.0
23.0 – 28.9
28.9 – 33.6
33.6 – 37.2
56.6
32.5
38.7
52.9
52.0
44.2
58.5
11.9
31.0
25.5
12.9
14.2
15.8
6.7
3.3
3.9
4.3
3.4
3.2
2.4
1.7
68.3
68.7
69.8
69.8
69.8
70.0
68.9
1.8
1.8
1.1
0.8
0.6
0.4
0.9
1.3
0.7
0.7
0.8
0.7
0.6
0.5
47.9
16.8
3.2
DTT
69.3
1.1
0.8
Averages
Table 3(a)
Details of the Davis Tube Test iron grade from the seven composites from Bekisopa drill hole BEKD10
which has shown an average iron head grade of 47.9%Fe being readily upgraded to an average grade of
69.3%Fe with very low silica and lumina levels and an iron recovery of 75.3%.
10 | P a g e
Head Grade
Davis Tube Test Grade
BEKD34
Composite
Composite
Interval (m)
Fe
%
Silica
%
Alumina
%
Fe
%
Silica
%
Alumina
%
1
2
3
4
5
6
7
0 – 4.9
4.9 – 10.43
10.43 – 14.8
14.8 – 18.7
18.7 – 23.0
23.0 – 29.36
29.36 – 34.8
59.4
62.1
41.1
51.0
54.1
59.2
45.6
7.2
4.7
18.2
8.6
4.9
3.5
6.9
2.7
1.6
1.8
1.5
1.1
0.9
1.3
68.9
69.4
69.7
70.4
69.5
70.0
68.8
1.2
0.6
0.9
0.4
0.4
0.4
0.5
1.0
0.7
0.2
0.3
0.5
0.4
0.4
53.2
7.7
1.6
DTT
69.5
0.6
0.5
Averages
Table 3(b)
Details of the Davis Tube Test iron grade from the seven composites from Bekisopa drill hole BEKD34
which has shown an average iron head grade of 53.2%Fe being readily upgraded to an average grade of
69.5%Fe with very low silica and alumina levels with average Phosphorous of 0.016% and Sulphur of
0.026% at an iron recovery of 92%.
The correlation between assay results and the product grade trials, wLIMS and DTT, looks to
be high and capable of being reproduced on all iron mineralisation. Drill hole BEKD10 on the
eastern edge of the Southern drill grid and BEKD34 on the western edge were tested for the
product grade potential using magnetic separation techniques of wLIMS and DTT.
Expectation is that these results, in all reasonable probability, would be reproduced across the
Southern Zone. Figure 6 and 7 below shows graphically the relationship between the assay
results and the wLIMS and DTT process trial results completed on drill hole BEKD10 and 34.
As previously shown in both the Central and Northern Zones, ASX Announcements of 13
January and 27 January 2022, the comparability continues to be the case in the Southern
Zone drill holes as the correlation is very high with the assaying results and as expected with
the wLIMS and DTT upgraded iron results.
In all reasonable probability we would expect the wLIMS and DTT results, at a 2mm crush size
and a 75-micron sizing, to achieve comparable very high-grade iron product grades, down
hole in BEKD10 and 34 and across the various Southern Zone drill holes.
BEKD10 - Head Grade (%Fe) V wLIMSProduct Grade (%Fe)
BEKD10 - Head Grade (%Fe) V DTT (%Fe)
Surface
Surface
wLIMS
DTT
69.3%Fe
Average
Grade
62.4%Fe
Head
Average
Grade
Grade
37.2m
-75.00
-25.00
75 -50.00
50
25
0.00
0.0
25.00
25
50.00
50
75.00
75
-75.00
7575 -50.00
5050 -25.00
2525
0.00
0.0
2525 50.00
5050 75.00
7575
0.0 25.00
(b)
(a)
Figure 6.
BEKD10 drill hole within the Southern Zone of the Bekisopa project showing upgrading of iron
mineralisation (a) using wLIMS, after a coarse 2mm crush, achieved excellent iron upgrading along seven
continuous near surface composites, averaging 62.4%Fe. Similarly, upgrading of iron mineralisation (b)
using DTT at a relatively coarse 75-microns, achieved excellent iron upgrading along all composites from
near surface to 37.2M downhole, averaging 69.3%Fe.
11 | P a g e
BEKD34 - Head Grade (%Fe) V wLIMS Product (%Fe)
BEKD34 - Head Grade (%Fe) V DTT Grade (%Fe)
Surface
Surface
wLIMS
DTT
66%Fe
69.5%Fe
Head
Average
Average
Grade
Grade
Grade
34.8m
-75.00
0.00
75 -50.00
50 -25.00
25
0.0
25.00
50.00
75.00
25
50
75
-75.00-50.00-25.00
0.00 25.00
75
50
25
0.0
25 50.00
50 75.00
75
(a)
(b)
Figure 7.
BEKD34 drill hole within the Southern Zone of the Bekisopa project showing upgrading of iron
mineralisation (a) using wLIMS, after a coarse 2mm crush, achieved excellent iron upgrading along seven
continuous near surface composites, averaging 66%Fe. Similarly, upgrading of iron mineralisation (b)
using DTT at a relatively coarse 75-microns, achieved excellent iron upgrading along all composites from
near surface to 37.2M downhole, averaging 69.5%Fe.
Figures 6 and 7 show the magnetic separation using DTT on BEKD10 and 34 at a relatively
coarse 75-micron sizing delivered an average product grade of 69.4%Fe at a 61.5% mass
yield and iron recovery of 83.6% from the surface to end of the iron mineralisation.
These outstanding iron concentrate grades at a relatively coarse 75-micron sizing shows
promise for Bekisopa to be able to deliver DRI pellet grade to meet the growing demand from
decarbonisation in the iron and steel industry by the increased production demand for DRI
pellets. Premium grade iron feed, with very low impurity levels as seen from BEKD10 and 34,
Table 3, is what is forecast to be required to produce DRI pellets from natural gas or green
hydrogen iron making processes. Bekisopa, is well placed to provide these growing markets
that have an abundance of natural gas, for example the Middle East, or those locations that
will be producing green hydrogen.
DTT product show very high iron grades, averaging 69.4%Fe, with low impurities, Table 4.
Average
BEKD10
Head
Grade
47.9
DTT
%Fe
69.3
DTT
%Silica
1.1
53.2
69.5
0.6
DTT
%Alumina
0.8
DTT %P
DTT %S
0.062
0.006*
0.5
0.016
0.004*
Surface to
37.2m
BEKD34
Surface to
34.8m
Table 4.
BEKD10 and 34 DTT achieves premium grade iron levels, average 69.4%Fe, and low impurity levels from
surface to ~37m downhole. Note *: The higher S levels at depth is likely due to the presence of pyrite,
iron sulfide in a few intervals.
12 | P a g e
%Fe
BEKD10 and 34 wLIMS and DTT V Head Grade (%Fe)
75
70
65
60
55
50
45
25
35
45
Head Grade - %Fe
55
65
Figure 8.
Process trial product grade assay results from Bekisopa drill hole BEKD10 and 34 for all seven composites from
surface to end of mineralisation downhole. The wLIMS results, red and blue markers, averaged 64.2%Fe. The DTT
results, black markers, delivered outstanding 69.4%Fe average grade. The DTT product grades for BEKD10 at head
grades of 32.5% and 38.7%Fe are lower than expected and also have lower iron recovery and mass yields indicating
the presence of non-magnetic iron, likely Hematite.
As shown from BEKD10 and 34, in Figure 8 above, that iron head grade composites >25%Fe
readily upgrade averaging 64.2%Fe which is better than benchmark iron product grade of
62%Fe, after magnetic separation at a coarse 2mm crush. The trendline, the red dotted line,
in Figure 8 above is from all 27 Bekisopa main tenement 10430 wLIMS process trials and
clearly shows the ability for plus 25%Fe head grades to be readily upgraded to better than
benchmark 62%Fe iron ore fines.
Accordingly, the comparable head grades from around these drill holes within the Southern
Zone would be expected to upgrade similarly. Table 4 and Figure 8 show the DTT product
grades are outstanding averaging 69.4%Fe for head grades from >25%Fe to 62.1%Fe, with
excellent average mass yield of 80.9% and iron recovery of 92%.
Across the Southern Zone, DTT for iron head grades from 15% to 25% shows very clean and
high-quality concentrate grades averaging 68%Fe, from an average head grade of 20.2%Fe
at a DTT mass yield of 18% and iron recovery of 59%, see Figure 9. These are excellent DTT
results at a relatively coarse grind of 75-microns, achieving a P80 of 62 microns. If in the
future this was a necessary processing stage for lower grade Bekisopa iron mineralisation it
looks to be capable of clearly delivering a premium high-quality DRI concentrate which is the
way the Green Steel Industry looks to be heading as one main way to reduce their carbon
emissions.
13 | P a g e
Bekisopa Southern Zone - DTT Grade (%Fe) V Head Grade (15 to 25%Fe)
80
70
60
50
40
30
20
10
0
Figure 9.
Southern Zone head grades from 15 to 25%Fe (red line) deliver a DTT product grade averaging 68%Fe
(black line). Premium iron product grade, and >67%Fe required for Direct Reduction Iron feed, at a
relatively coarse grind size of 75-microns.
Conclusion
The Bekisopa Southern Zone drilling assays show several very high-grade near surface results
across numerous drill holes; 68.2%Fe, 66.8%Fe, 65.9%Fe, 65.5%Fe, 65.5%Fe, 64.9%Fe and
62.9%Fe from surface up to 14.7m downhole and these are expected to be suitable for DSO
at better than benchmark grade. Significant volumes of readily upgradeable iron mineralisation
are present and this iron mineralisation is seen to continue up to 185m downhole.
Assay results from depths downhole also contain some very high-grade iron intercepts; 4.2m
@ 66.1%, 7.5m @ 64.9%, 13.3m at 64.4%, 9.2m @ 64.6%, 11m @ 64% and 19.49m @
63.3%, these iron grades are DSO meaning they only require to be mined, crushed and
screened to produce benchmark grade 62%Fe, or better, as lump and fines products.
The Southern Zone has twelve drill holes with high near surface iron grades, of better than
Benchmark grade of 62%Fe and up to 68%Fe. Across the four main drill grid lines there are
ten deeper holes, from 139.6m to 208.8m. Within these deeper holes there are significant
continuous iron mineralisation intercepts from 79.4m to 162.8m with average iron grades
ranging from 35.9% to 41.2%Fe and numerous mid-intercept grades of 51.7% to 64.4%Fe.
Iron grades have been shown via test work on drill holes BEKD10 and 34 to readily upgrade
using wLIMS magnetic separation to an average of 64.2%Fe after at -2mm crush and then to
69.4%Fe after DTT processing at -75µm grind.
DTT performed on BEKD10 and 34 from surface to 37 metres downhole, an average of
50.6%Fe, delivered a product averaging 69.4%Fe at very low impurity levels of 0.9% Silica,
0.7% Alumina, 0.04% Phosphorous and 0.005% Sulphur, very encouraging results indicating
that Bekisopa could potentially be a future provider of very clean premium grade +67% iron
ore suitable for DRI pellet production - the crucial feed material for the iron and steel industry
to decarbonise and produce Green Steel.
14 | P a g e
For further information please contact:
Paul G Bibby
Managing Director
Phone +61(0) 419 449 833
www.akoravy.com
Peter Taylor
Investor Relations
Phone +61(0) 412 036 231
Peter@nwrcommunications.com.au
About AKORA Resources
AKORA Resources (ASX: AKO) is an exploration company engaged in the exploration and
development of the Bekisopa Project, the Tratramarina Project and the Ambodilafa Project,
iron ore projects in Madagascar, in all totaling some 308 km2 of tenements across these three
prospective exploration areas. Bekisopa Iron Ore Project is a high-grade magnetite iron ore
project of >4km strike and is the key focus of current exploration drilling and resource
modelling.
Competent Person’s Statement
The information in this report that relates to Exploration Targets, Exploration Results, and related
scientific and technical information, is based on, and fairly represents information compiled by Mr
Antony Truelove. Mr Truelove is a consulting geologist to Akora Resources Limited (AKO). He is a
shareholder in Akora Resources Limited, holding 4,545 Shares he purchased in 2011, some 8 years
prior to being engaged as a consultant. Mr Truelove is a Member of the Australasian Institute of Mining
and Metallurgy (MAusIMM) and a Member of the Australian Institute of Geoscientists (MAIG). Mr
Truelove has sufficient experience which is relevant to the styles of mineralisation and types of deposits
under consideration and to the activity which he is undertaking to qualify as a Competent Person as
defined in the JORC Code. Mr Truelove consents to the inclusion in this report of the matters based
on his information in the form and context in which it appears including sampling, analytical and test
data underlying the results.
Competent Person’s Statement
The information in this report that relates to Mineral Processing and related scientific and technical
information, is based on, and fairly represents information compiled by Mr Paul Bibby
Share your feedback
Discover